商讯信箱
用户名: @
密  码:   注册|忘记密码
登录
个人用户经销商
信箱 E杂志
您的位置:首页 > 网络专区 > 正文       

CISCO交换机VLAN配置思路

作者:新客网  2007-06-06   

  建在交换机上创建vlan

  建立一个vtp管理域

  为了在交换机上创建vlan,必须首先建立一个vtp管理域以使它能够核验网络上当前的vlan

Catalyst 4000 系列交换机模块只支持802.1q。

  判断硬件是否支持干道,及硬件所支持的干道封装使用:show portcapabilities

  首先运行clear config allvtp command:

  在基于IOS的交换机上配置VTP管理域或加入一个管理域:

  switch# vlan database

  witch(vlan)# vtp domain domain-name

  在基于CLI的交换机上配置VTP管理域:

  switch(enable) set vtp [domain domain-name] passwd password在基于IOS的交换机上配置VTP 模式:

  witch# vlan database

  witch(vlan)# vtp domain domain-name

  witch(vlan)# vtp {sever|cilent|transparent}

  witch(vlan)# vtp password password

  在基于CLI的交换机上配置VTP 模式:

  switch(enable) set vtp [domain domain-name] [mode{sever|cilent|transparent }][password password]

  核验vtp的配置:

  how vtp domain

  how vtp statistics

  在基于IOS的交换机上配置VTP版本:

  VTP版本1是缺省配置

  witch# vlan database

  witch(vlan)# vtp v2-mode

  在基于CLI的交换机上配置VTP版本:

  witch(enable) set vtp v2 enable在基于IOS的交换机上启动VTP剪裁:

  witch# vlan database

  witch(vlan)# vtp pruning

  在基于CLI 的交换机上启动VTP剪裁:

  witch(enable) set vtp pruning enable

  (set vtp pruneeligible vlan-range)

  不起用vtp修剪:

  clear vtp pruneeligible vlan-range

  核验vtp修剪的配置:

  how trunk

  创建Vlan在基于IOS的交换机上配置静态VLAN:

  witch# vlan database

  witch(vlan)# vlan vlan-num name vlan-name

  witch(vlan)# exit

  witch# configure teriminal

  witch(config)# interface interface module/number

  witch(config-if)# switchport mode access

  witch(config-if)# switchport access vlan vlan-num

  witch(config-if)# end

  在基于CLI的交换机上配置静态VLAN:

  witch(enable) set vlan vlan-num [name name]

  witch(enable) set vlan vlan-num mod-num/port-list核验配置:show vlan

  配置干道链路

  干道是在两台catalyst交换机端口或catalyst交换机与路由器间的一条点对点链路。

  干道链路可以承载多个vlan。

  在基于IOS的交换机上配置干道链路

  witch(config)# interface interface mod/port

  witch(config-if)# switchport mode trunk

  witch(config-if)# switchport trunk encapsulation {isl|dotlq}

  witch(config-if)# switchport trunk allowed vlan remove vlan-list

  witch(config-if)# switchport trunk allowed vlan add vlan-list

  在基于CLI的交换机上配置干道链路:

  witch(enable) set trunk module/port[on|off|desirable|auto|nonegotiate]

  Vlan-range

  文章原始出处:http://www.xker.com/Html/wlyl/VLAN/20051209384.html

1
有问必答
【内容导航】
第1页:CISCO交换机VLAN配置思路
©版权所有。未经许可,不得转载。
[责任编辑:晓霞] [我要挑错]
相关产品
本文相关产品
   没有相关产品